"KNOWLEDGE-BASED FITNESS"
Showing posts with label suitcase deadlift. Show all posts
Showing posts with label suitcase deadlift. Show all posts

Tuesday, June 14, 2016

Asymmetric Resistance for Trunk Stability

Asymmetric Resistance for Trunk Stability

When training in the gym, we tend to want to train one side of our body exactly the same as the other side, focusing on "symmetry."
If we curl a 25 pound dumbbell with our right arm, we try our best to perform the same number of reps with that same resistance using the left arm.  When it comes to training for trunk stability, however, applying an asymmetric weight to each side may be more realistic and applicable to our everyday activities.  If we are squatting or lunging to pick something up from the ground, many times the weight distribution, especially if it is an irregularly shaped object, may be more to our right or left side.  One example is carrying grocery bags into the house from your car.  You most likely do not weigh the bags and place the exact same amount in each hand.  One hand always ends up carrying more.  When walking with the bags, we still try our best to maintain a stable upright trunk so that we are not leaning toward the right or left.  So why not incorporate this into training from time to time?    It may not be that terrible to train each side with a different amount of weight.  
Instead of Suitcase Dealifting the exact same weight on each side, start off with a heavier weight in one hand for one set, and then switch for the next set.  The focus should be on performing the Deadlift without allowing your trunk to "give in" to the heavier side, but keeping your trunk upright.

Same thing with the Kettlebell Squat.  Try a heavier weight on 1 side.  Then switch sides for the next set

This can be done by just squatting with 1 kettlebell one 1 side, but then switch it up and use 2 different weighted kettlebells in order to apply a higher total amount of weight to your body.

Try a combo movement of a squat press using different weights.  Now you must stabilize your trunk with asymmetric resistance while transitioning from the ground to standing to pressing overhead, all while not allowing your trunk to lose control

This is just another way of introducing various perturbations to your body in order to train it to maintain and maximize its stability

Tuesday, January 21, 2014

The Suitcase Deadlift Using Neurogrips and Directional Force: Ulnar Deviation

The Suitcase Deadlift Using Neurogrips and The Nabard Device

 
 The Nabard Long Device used in this example is a device similar to a barbell.  However, the 1 inch diameter handle is offset rather than centralized.   The Neurogrips easily slide on your hand, adding 1" diameter to the Nabard Device handle, making it about 2" in diameter.  Combined with the offset handle, the Neurogrips challenge your grip and help strengthen your hand, wrist, forearm as well as your shoulder and trunk musculature. 

 The setup for this technique is the same as the previous post.  You stand with your foot next to the handle of the device.  This time, however, the long end of the device is behind you instead of in front of you.
 
 Squat back and down and grip the handle tightly using the Neurogrips. 
 
 
"Spread the floor" with your feet and stand up tall.  Do not allow the back end of the device to dip down.  Your job is to keep the device parallel to the ground.  The long lever posterior is providing a directional force downward, which places radial deviation on your wrist.  To maintain the neutral wrist position, you must fire your ulnar deviators.  So you are gripping the handle while at the same time performing ulnar deviation in order to maintain neutral wrist position and keep control of the device.  This is the opposite action of the previous post.

Saturday, January 18, 2014

Suitcase Deadlift With Nabard Long Device

Suitcase Deadlift With Nabard Long Device & Neurogrips
 
The Nabard Long Device used in this example is a device similar to a barbell.  However, the 1 inch diameter handle is offset rather than centralized.   The Neurogrips easily slide on your hand, adding 1" diameter to the Nabard Device handle, making it about 2" in diameter.  Combined with the offset handle, the Neurogrips challenge your grip and help strengthen your hand, wrist, forearm as well as your shoulder and trunk musculature. 
 Set up is the same as the Suitcase Deadlift using the Kettlebell.  Stand with the 'rear' handle just lateral to your foot.  Place the Neurogrip on the hand that is nearest to the handle that you will be gripping.
 
 
Squat back and down keeping your knees in line with your toes, your weight on your heels, "spreading the floor" with your feet.  Grip the handle of the device closest to your foot.

Stand up, again "spreading the floor" with your feet.  Try your best to maintain the Nabard device in a straight line, parallel to the floor.  This is where your grip is really challenged.  The length of the Nabard device acts as a long lever.  It is not a high weight, however it is difficult to manage due to the long lever.  This lever is providing a force in the direction of ulnar deviation (the end of the device furthest from you wants to dip down toward the ground.  This direction is toward the pinky or ulnar deviation).  Since your goal is to keep it level, you must fire your radial deviator muscles.  So in this activity, you are working your legs, glutes, and trunk stabilizers as it is unilateral.  Adding weight to one side causes your trunk to laterally flex toward the weight.  Your trunk must fight this and remain stable.  As for your arm, you are not only squeezing the handle using Neurogrips (now 2" diameter), you are keeping your wrist in neutral by firing radial deviators to counteract ulnar deviation directional force of the long levered device.  Your shoulders and scapulae do not move, so you are also working scapula and shoulder stabilizers.  A full body activity!!

 
 

Sunday, January 12, 2014

The Kettlebell Suitcase Deadlift With Neurogrips

The Kettlebell Suitcase Deadlift With Neurogrips
 
 
The Kettlebell used in this example has a handle that is approximately 1.25" to 1.5" in diameter.  The length of the handle is about 4.5" with curved corners ("Horns") which makes it difficult for other grip enhancing devices to fit over.  The Neurogrips easily slide on your hand, adding 1" diameter to the Kettlebell handle, making it between 2.25" and 2.5" in diameter.  This challenges your grip and helps strengthen your hand, wrist, forearm as well as your shoulder and trunk musculature. 
 

Keep your feet about hip width apart

Squat down 'symmetrically', grip the kettlebell handle

Return to the standing position gripping the kettlebell
 
Things to remember:
1) When lowering your body to grab the kettlebell, perform the hip hinge technique, flexing at your hips and not your lower back -- Some verbal cues: "Squat back, not down - push your butt back as if reaching back for a chair"
2) As you lower yourself, you will have the tendency to sidebend toward the kettlebell. Don't do this.  This exercise is not only working your legs and grip, it is also a trunk stabilizer.  If you maintain the initial spinal alignment and do not allow yourself to sidebend or rotate/twist towards the weight, you are using your trunk musculature (laterally the Quadratus Lumborum) as well as obliques, and transversus abdominals to stabilize your spine and trunk.  The fact that you are not compensating by sidebending towards the kettlebell also helps you to squat deeper, assisting you in gaining more functional range of motion/flexibility.
3) Upon rising to upright standing position, focus on maintaining symmetric shoulder height, again avoiding sidebending or rotating.  If you are holding the kettlebell in the right hand, your left lateral trunk muscles are working to stop you from sidebending to the right ("Don't give in to the weight").  
4) As you ascend to the starting point, make sure you do so while firing your glutes.  Try to spread the floor with your feet.  At the very top, 'lock out' by clenching your butt. 
5) Keep your shoulder blades retracted throughout. No forward rounded shoulders
 
The kettlebell in this technique is providing a vertical force to your hand, wrist, forearm, etc... There is no directional bias here towards wrist flexion, extension, radial deviation, ulnar deviation, pronation or supination.  Your wrist remains in neutral and your hand is working hard to grip the kettlebell, preventing it from falling vertically from your hand.  Doing this bare handed is a challenge in itself.  Using Neurogrips makes it even more difficult.  
 
Check out Neurogrips at www.neurogrips.com