"KNOWLEDGE-BASED FITNESS"
Showing posts with label trunk stability. Show all posts
Showing posts with label trunk stability. Show all posts

Tuesday, June 14, 2016

Asymmetric Resistance for Trunk Stability

Asymmetric Resistance for Trunk Stability

When training in the gym, we tend to want to train one side of our body exactly the same as the other side, focusing on "symmetry."
If we curl a 25 pound dumbbell with our right arm, we try our best to perform the same number of reps with that same resistance using the left arm.  When it comes to training for trunk stability, however, applying an asymmetric weight to each side may be more realistic and applicable to our everyday activities.  If we are squatting or lunging to pick something up from the ground, many times the weight distribution, especially if it is an irregularly shaped object, may be more to our right or left side.  One example is carrying grocery bags into the house from your car.  You most likely do not weigh the bags and place the exact same amount in each hand.  One hand always ends up carrying more.  When walking with the bags, we still try our best to maintain a stable upright trunk so that we are not leaning toward the right or left.  So why not incorporate this into training from time to time?    It may not be that terrible to train each side with a different amount of weight.  
Instead of Suitcase Dealifting the exact same weight on each side, start off with a heavier weight in one hand for one set, and then switch for the next set.  The focus should be on performing the Deadlift without allowing your trunk to "give in" to the heavier side, but keeping your trunk upright.

Same thing with the Kettlebell Squat.  Try a heavier weight on 1 side.  Then switch sides for the next set

This can be done by just squatting with 1 kettlebell one 1 side, but then switch it up and use 2 different weighted kettlebells in order to apply a higher total amount of weight to your body.

Try a combo movement of a squat press using different weights.  Now you must stabilize your trunk with asymmetric resistance while transitioning from the ground to standing to pressing overhead, all while not allowing your trunk to lose control

This is just another way of introducing various perturbations to your body in order to train it to maintain and maximize its stability

Sunday, May 3, 2015

Train Smarter!

Train Smarter!

When trying to balance your training with work and family obligations, you may find yourself short on time.  But you figure, "something is better than nothing." So you need to train smart.  Knowing what you are training will help you to train efficiently.  So you should choose exercises wisely.  One example is the kettlebell lunge.
The 1 Arm Racked Kettlebell Lunge:

This exercise is obviously a leg exercise.  But that is not all!  You must hold the kettlebell in the racked position using one arm.  This places an asymmetric downward force on the kettlebell side of your trunk/body.  To prevent laterally "giving in" to the added weight, the opposite side of your trunk must contract to stabilize in order to maintain a neutral spine.  You must maintain grip on the kettlebell handle and not allow the shoulder blade on the side of the kettlebell to drop or protract due to the added weight either.  In all, you are training the legs, the trunk, grip and scapula stability.



Double Kettlebell Lunge:

Although you are lunging with added weight compared to the single kettlebell lunge, you do not have the asymmetric weight applied to the trunk.  So lateral stability will not be as much of an issue.  However, you must still maintain grip of each handle, prevent both scapula from protracting, and the added weight to your chest/trunk will actually make it slightly more difficult to deeply inhale during the set



To increase the challenge further, perform the Bottoms Up Kettlebell Lunge.  Here, you are working even harder to maintain control of the kettlebell handle using hand, wrist and forearm strength.  This also challenges scapula and shoulder stability on the kettlebell side, and the asymmetric weight will again require lateral trunk stability.  

So, if you want to get more bang for your buck, making slight adjustments to a traditional exercise will train more than you initially thought.  You end up training multiple regions of the body using one technique.  This is efficient training!

Sunday, April 19, 2015

Incorporate This Trunk Rotation Stability Exercise

Incorporate This Trunk Rotation Stability Exercise
 
When lifting anything, we hear "lift with your legs, not your back!"  When using the spine  to perform resistive activities, many times a dangerous amount of pressure is placed on the ligaments and intervertebral discs.  Over time, this may lead to injuries such as bulging or herniated discs.  Spinal flexion places strain on the discs.  Spinal rotation also places strain on the discs.  But when you combine the movements (flexion with rotation), the discs are most vulnerable.  If these motions are dangerous, is it wise to perform them with resistance added?  I prefer to focus on Spinal Stabilization rather than Resistive Trunk Strengthening Exercises.   
 

Some common trunk exercises you may have seen are the Side Bend QL, Resistance Tubing Trunk Rotation, and the Medicine Ball Trunk Twist.
 



 
 
These exercises are aimed at strengthening the spine throughout the range of motion.  But at what cost? 
 
Try to incorporate the following exercise to your routine for Spinal Rotation Stability. 
Rack a Kettlebell in 1 hand.  This alone places an asymmetric force on your spine.  Your goal is to maintain a neutral spine and not allow the trunk to side-bend toward the added weight.  This is already working the QL on the opposite side of the Kettlebell

 
Press the weight overhead.  This continues to challenge your trunk's stability with the  direction of the force applied from a different position/angle

 
Here's where the rotation comes in.  Instead of actively twisting your spine with the applied resistance (as shown in the Med Ball Twist and Resistance Band Trunk Rotation pics above), rack the weight, rotate your trunk about 30 degrees to the right while maintaining forward facing hips (Your knees and pelvic bones continue to point straight ahead), and then perform the shoulder press.  Attempt a few reps in this position   

 
 
Then, rotate your trunk a little further from the 30 degrees to about 60 degrees trunk rotation.  Again, keep your hips and knees pointing forward.  Press the weight overhead.

 
 
Repeat to the other side at 30degrees, then 60degrees. 

 
The point to this exercise is to engage your trunk stabilizers at a spinal position, and maintaining this stability throughout the lift.  You are challenging multiple spinal positions by varying the amount of trunk rotation.  You are NOT using the spine to rotate a load. You are using the trunk musculature to stabilize the spine when in a rotated position.  This, in my opinion is a safer way to train your trunk.

 
Add even more of a challenge to your grip, trunk and shoulder stabilizers by performing the same activity with the Kettlebell in the Bottoms Up Position...Then try it with Neurogrips!!(www.neurogrips.com)

 


Tuesday, June 17, 2014

Summer Time is Perfect to Learn Core Engagement

Summer Time is Perfect to Learn Core Engagement
 
 
 
Just this past weekend I was visiting family in Rhode Island.  My 4 year old wanted to go swimming and so I began to blow up the many pool toys my father-in-law had purchased for the kids.  We did not have an air compressor available so I had to do it the old fashioned way.  After blowing up the third toy, I realized that as I pursed my lips tightly around the air nozzle in order to open the safety valve, and began to blow into the tube, my core engaged quickly and firmly.  It was not a "drawing in" or "hollowing," nor was it flexing of my abs.  It felt like my entire core stabilized my spine 360 degrees.  If you are having a difficult time teaching your clients (or youself) what true core recruitment and engagement should feel like, go to the dollar store and pick up an inflatable pool toy.  Try it for yourself.  Upon inflating the toy, keep one hand on your abs/obliques and you will feel it immediately.  Then try to incorporate this recruitment with your lifts.

Thursday, May 22, 2014

Rotational Stability of The Trunk

Rotational Stability of The Trunk
The Renegade Row
 
The previous blog posts discuss exercises that are beneficial for developing rotational stability of the trunk using body weight.  These should be performed correctly prior to performing stability exercises using weight/resistance. 
 
Assuming you are able to maintain stability with the prior exercises, you may attempt Renegade Rows, using Kettlebells or Dumbbells.
 
Start Position Renegade Rows - Notice the flat lower back

Here, I shift my body weight onto my right arm in order to row the kettlebell using my left arm.  My hips and shoulders remain "squared-off" with the ground - Next I lower the left arm, shift my body weight to my left arm and row using the right arm

Incorrect Form: My hips and shoulders are not "squared-off" with the ground

Incorrect From: My lower back is not flat, but jacknifes prior to the row

The above two incorrect techniques are very commonly seen with clients who do not have the rotational stability to perform this exercise.  They may have trunk weakness or may just need additional verbal and manual cues in order to improve the motor planning/coordination of the activity. 


Monday, May 19, 2014

Rotational Stability of The Trunk

Rotational Stability of The Trunk
 
The Super Plank is a great trunk stabilization technique.  It actually requires you to maintain a stable trunk while transitioning from a static position, 'dynamically' to another static position.  At the point of incorporating this activity into your program, you should have no problem maintaining static trunk positions.  The challenge here is dynamic stabilization.  You are moving from the Low Plank position to the High Plank position with minimal trunk rotation.   
 
Start Position: Low Plank

 I transfer my body weight onto my right arm in order to change the position of my left arm to the high plank position.  With this, a rotational load is placed on my trunk

Incorrect: This would need a correction, as you can see my left hip is no longer "squared-off" with the ground.  I gave in to the rotational force

Correct High Plank Position

Incorrect High Plank Position: I am in a jacknifed position rather than a high plank position

Transition from High Plank to Low Plank: Here, I transfer my bodyweight onto my right arm in order to reposition my left arm into a low plank position without losing the "squared-off" hip position with the ground

Incorrect transition of High Plank to Low Plank.  My right hip is higher than my left hip.  Both hips should be level and parallel to the ground

If you see your client performing the Super Plank technique with any of the "incorrect" behaviors mentioned above, attempt to correct them verbally or manually.  If they can not correct it, then this may be too advanced at this time.  Check out the previous posts for less aggressive stability techniques to master prior to returning to the Super Plank


Sunday, May 18, 2014

Rotational Stability of The Trunk

Rotational Stability of The Trunk
 
In the last post, I talked about maintaining stability of the trunk while performing the High Plank Shoulder/Elbow Tap, with various foot positions.  In this post, I will disucss maintaining trunk rotational stability while performing the High Plank Hip Extension technique, with modified hand positioning.
 
 

Start position - Notice the hand and foot position - The hips are "squared-off" with the ground

Slowly lift one leg while maintaining the hip "squared-off" position - If you place a  broomstick across the lower back horizontally from one hip to the other, the stick should be parallel to the ground - One side of the stick should not be higher than the other (This is a good feedback technique)
 
Progress the exercise by adjusting the base of support - Decreasing the base (hand position)increases the difficulty

Completion of the level two exercise

Incorrect Performance - It is subtle, but if you look at my right hip, it is slightly higher than my left - I lost the "squared-off" positioning of my hips - This would be more noticeable using the broomstick to assess - I lost the rotational stability slightly - Look for this compensation with clients when training rotational stability


Another common compensation for inability to stabilize the trunk is the jacknifed position seen here prior to hip extension.  This is no longer the High Plank Position